Attachment & Hydraulic
DAF
For DAF, SCHMIDT delivers components for the LF 55.250 model.
Mounting plates & additional lighting
SCHMIDT delivers matching mounting plates for the mounting of front attachments for DAF trucks to all internationally required specifications. The additional lighting provides the best possible illumination of the carriageway and the working area when working with front mounted gear.
| Mounting plates & additional lighting |
|
One-circuit hydraulic system for attachments
The one-circuit hydraulic system for DAF trucks can raise, lower or swivel a snow plough.
| One-circuit hydraulic system for attachments |
|
One-circuit hydraulic system for spreaders
The one-circuit hydraulic system for DAF trucks can drive and control a spreader.
| One-circuit hydraulic system for spreaders |
|
Two-circuit hydraulic system
The two-circuit hydraulic system for DAF trucks can simultaneously drive and control a front-mounted attachment and a spreader.
| Two-circuit hydraulic system |
|
Electrohydraulic system
As an alternative to using vehicle hydraulics, it is possible to operate a snow plough with an electrohydraulic system without complicated refitting on a DAF truck.
IVECO
For IVECO, SCHMIDT delivers components for the CARGO, TRAKKER and STRALIS models.
Mounting plates & additional lighting
SCHMIDT delivers matching mounting plates for the mounting of front or side attachments for IVECO trucks to all internationally required specifications. SCHMIDT additional lighting provides the best possible illumination of the carriageway and the working area when working with front-mounted attachments.
| Mounting plates & additional lighting |
|
One-circuit hydraulic system for attachments
The one-circuit hydraulic system for IVECO trucks can raise, lower or swivel a snow plough.
| One-circuit hydraulic system for attachments |
|
One-circuit hydraulic system for spreaders
The one-circuit hydraulic system for IVECO trucks can drive and control a spreader.
| One-circuit hydraulic system for spreaders |
|
Two-circuit hydraulic system
The two-circuit hydraulic system for IVECO trucks can simultaneously drive and control a front-mounted attachment and a spreader.
| Two-circuit hydraulic system |
|
Three-circuit hydraulic system
The three-circuit hydraulic system for IVECO trucks can simultaneously drive and control a front-mounted attachment, a lateral snow plough and a spreader.
| Three-circuit hydraulic system |
|
Load-sensing hydraulic system
The load-sensing hydraulic system for IVECO trucks can drive and control several attachments. The particular advantage of this is that the respective oil flow is automatically adjusted to the actual requirement.
| Load-sensing hydraulic system |
|
Electrohydraulic system
As an alternative to using the vehicle hydraulics, a snow plough can be operated by the electrohydraulic system without costly alterations to an IVECO truck.
MAN
For MAN, SCHMIDT delivers components for the L 2000, M 2000, TGM and TGA models.
Mounting plates & additional lighting
SCHMIDT delivers matching mounting plates for the mounting of front or side attachments for MAN trucks to all internationally required specifications. SCHMIDT additional lighting provides the best possible illumination of the carriageway and the working area when working with front-mounted attachments.
| Mounting plates & additional lighting |
|
One-circuit hydraulic system for attachments
The one-circuit hydraulic system for MAN trucks can raise, lower or swivel a snow plough.
| One-circuit hydraulic system for attachments |
|
One-circuit hydraulic system for spreaders
The one-circuit hydraulic system for MAN trucks can drive and control a spreader.
| One-circuit hydraulic system for spreaders |
|
Two-circuit hydraulic system
The two-circuit hydraulic system for MAN trucks can simultaneously drive and control a front-mounted attachment and a spreader.
| Two-circuit hydraulic system |
|
Three-circuit hydraulic system
The three-circuit hydraulic system for MAN trucks can simultaneously drive and control a front-mounted attachment, a lateral snow plough and a spreader.
| Three-circuit hydraulic system |
|
Load-sensing hydraulic system
The load-sensing hydraulic system for MAN trucks can drive and control several attachments. The particular advantage of this is that the respective oil flow is automatically adjusted to the actual requirement.
| Load-sensing hydraulic system |
|
Electrohydraulic system
As an alternative to using the vehicle hydraulics, a snow plough can be operated by an electrohydraulic system without costly alterations to MAN trucks.
Mercedes-Benz
For MERCEDES-BENZ, SCHMIDT delivers components for the SPRINTER, VARIO, ATEGO, AXOR and ACTROS models.
Mounting plates & additional lighting
SCHMIDT delivers matching mounting plates for the mounting of front or side attachments for MERCEDES-BENZ trucks to all internationally required specifications. SCHMIDT additional lighting provides the best possible illumination of the carriageway and the working area when working with front-mounted gear.
| Mounting plates & additional lighting |
|
One-circuit hydraulic system for attachments
The one-circuit hydraulic system for MERCEDES-BENZ trucks can raise, lower or swivel a snow plough.
| One-circuit hydraulic system for attachments |
|
One-circuit hydraulic system for spreaders
The one-circuit hydraulic system for MERCEDES-BENZ trucks can drive and control a spreader.
| One-circuit hydraulic system for spreaders |
|
Two-circuit hydraulic system
The two-circuit hydraulic system for MERCEDES-BENZ trucks can simultaneously drive and control a front-mounted attachment and a spreader.
| Two-circuit hydraulic system |
|
Three-circuit hydraulic system
The three-circuit hydraulic system for MERCEDES-BENZ trucks can simultaneously drive and control a front-mounted attachment, a lateral snow plough and a spreader.
| Three-circuit hydraulic system |
|
Load-sensing hydraulic system
The load-sensing hydraulic system for MERCEDES-BENZ trucks can drive and control several attachments. The particular advantage of this is that the respective oil flow is automatically adjusted to the actual requirement.
| Load-sensing hydraulic system |
|
Electrohydraulic system
As an alternative to using the vehicle hydraulics, a snow plough can be operated by the electrohydraulic system without costly alterations to MERCEDES-BENZ trucks.
RENAULT
For RENAULT, SCHMIDT delivers components for the MIDLUM and KERAX models.
Mounting plates & additional lighting
SCHMIDT delivers matching mounting plates for the mounting of front or side attachments for RENAULT trucks to all internationally required specifications. SCHMIDT additional lighting provides the best possible illumination of the carriageway and the working area when working with front-mounted attachments.
| Mounting plates & additional lighting |
|
One-circuit hydraulic system for attachments
A one-circuit hydraulic system for RENAULT trucks can raise, lower or swivel a snow plough.
| One-circuit hydraulic system for attachments |
|
One-circuit hydraulic system for spreaders
A one-circuit hydraulic system for RENAULT trucks can drive and control a spreader.
| One-circuit hydraulic system for spreaders |
|
Two-circuit hydraulic system
The two-circuit hydraulic system for RENAULT trucks can simultaneously drive and control a front-mounted attachment and a spreader.
| Two-circuit hydraulic system |
|
Three-circuit hydraulic system
The three-circuit hydraulic system for RENAULT trucks can simultaneously drive and control a front-mounted attachment, a lateral snow plough and a spreader.
| Three-circuit hydraulic system |
|
Load-sensing hydraulic system
The load-sensing hydraulic system for RENAULT trucks can drive and control several attachments. The particular advantage of this is that the respective oil flow is automatically adjusted to the actual requirement.
| Load-sensing hydraulic system |
|
Electrohydraulic system
As an alternative to using the vehicle hydraulics, a snow plough can be operated by an electrohydraulic system without costly alterations to RENAULT trucks.
SCANIA
For SCANIA, SCHMIDT delivers components for the P, R and T construction series.
Mounting plates & additional lighting
SCHMIDT delivers matching mounting plates for the mounting of front or side attachments for SCANIA trucks to all internationally required specifications. SCHMIDT additional lighting provides the best possible illumination of the carriageway and the working area when working with front-mounted attachments.
| Mounting plates & additional lighting |
|
One-circuit hydraulic system for attachments
A one-circuit hydraulic system for SCANIA trucks can raise, lower or swivel a snow plough.
| One-circuit hydraulic system for attachments |
|
One-circuit hydraulic system for spreaders
The one-circuit hydraulic system for SCANIA trucks can drive and control a spreader.
| One-circuit hydraulic system for spreaders |
|
Two-circuit hydraulic system
The two-circuit hydraulic system for SCANIA trucks can simultaneously drive and control a front-mounted attachment and a spreader.
| Two-circuit hydraulic system |
|
Load-sensing hydraulic system
The load-sensing hydraulic system for SCANIA trucks can drive and control several attachments. The particular advantage of this is that the respective oil flow is automatically adjusted to the actual requirement.
| Load-sensing hydraulic system |
|
Electrohydraulic system
As an alternative to using the vehicle hydraulics, a snow plough can be operated by the electrohydraulic system without costly alterations to SCANIA trucks.
UNIMOG
For UNIMOG, SCHMIDT delivers components for the UGN construction series and U 3000, U 4000 and U 5000.
Additional lighting
Additional lighting provides the best possible illumination of the carriageway and the working area when working with front mounted attachments, such as a snow plough, snow cutter or sweeper.
One-circuit hydraulic system for attachments
The one-circuit hydraulic system for UNIMOG can raise, lower or swivel a snow plough.
| One-circuit hydraulic system for attachments |
|
Electrohydraulic system
As an alternative to using the vehicle hydraulics, a snow plough can be operated by the electrohydraulic system without costly alterations to the UNIMOG.
VOLVO
For VOLVO, SCHMIDT delivers components for the FM and FL models.
Mounting plates & additional lighting
For VOLVO, Schmidt delivers components for the FM and FL models.
| Mounting plates & additional lighting |
|
One-circuit hydraulic system for attachments
The one-circuit hydraulic system for VOLVO trucks can raise, lower or swivel a snow plough.
| One-circuit hydraulic system for attachments |
|
One-circuit hydraulic system for spreaders
The one-circuit hydraulic system for VOLVO trucks can drive and control a spreader.
| One-circuit hydraulic system for spreaders |
|
Two-circuit hydraulic system
The two-circuit hydraulic system for VOLVO trucks can simultaneously drive and control a front-mounted attachment and a spreader.
| Two-circuit hydraulic system |
|
Three-circuit hydraulic system
The three-circuit hydraulic system for VOLVO trucks can simultaneously drive and control a front-mounted attachment, a lateral snow plough and a spreader.
| Three-circuit hydraulic system |
|
Load-sensing hydraulic system
The load-sensing hydraulic system for VOLVO trucks can drive and control several attachments. The particular advantage of this is that the respective oil flow is automatically adjusted to the actual requirement.
| Load-sensing hydraulic system |
|
Electrohydraulic system
As an alternative to using the vehicle hydraulics, a snow plough can be operated by the electrohydraulic system without costly alterations to VOLVO trucks.
Other vehicle manufacturers
Depending on requirements, SCHMIDT is also pleased to equip other basic vehicles.
Other vehicle manufacturers
SCHMIDT has many years of comprehensive experience fitting vehicles with mounting plates, additional lighting and hydraulics.
This expertise means that we are also pleased to equip vehicles of all other makes.
| Other vehicle manufacturers |
|